QuistED.net

Basics:

• sh log
• show interface
• show cdp neighbors
  • show cdp neighbors details

Port Security

• show port-security
• show port-security interface fa0/1
• show port-security address

Etherchannel

• sh cdp nei
• show etherchannel sum
• show int portchannel

SNMP – Simple network management protocol

• Manager – Monitoring device
• Agent – Devices being monitored
• MIB – management information Base
• UDP port 161
• Uses GETs and SETs
• SNMP Traps
  • Agent informs the manager.
• SNMPv1 and 2c have community strings.
• SNMPv3 has encryption and authentication.
  • auth – Group using the AuthNoPriv Security Level
    • Authentication: yes
    • Privacy ( encryption ): no
  • noauth – Group using the noAuthNoPriv Security Level
    • Authentication: no
    • Privacy ( encryption ): no
  • Priv – Group using the AuthPriv Security Level
    • Authentication: yes
    • Privacy ( encryption ): yes
• If no read view is defined , all objects can be read.
• If no write view is defined , no objects can be written.
• If no notify view is defined , group members are not sent notifications.

(more…)

LAB III ( DMVPN, MGRE, NHRP, EIGRP)

• Point-to-multipoint layer 3 overlay VPN
• Logical hub and spoke topology
• Direct spoke to spoke is support

DMVPN uses a combination of:

• Multipoint GRE tunnels (mGRE)
• Next Hop Resolution Protocol ( NHRP )
• IPsec Crypto Profiles
• Routing

(more…)

• Virtual Private Network
  • Route exchange privacy
  • Path determination for packets
  • Data Security
    • IPSec IP security
  • Collection of standized protocols that provide
    • Confidentiality
    • Integrity
    • Authentication
    • Anti-Reply

(more…)

• Transition technique designed to allow native IPv6 hosts to access IPv4-only content.
  • (Translation technique not a tunneling technique).
• Primarily used to allow v6 hosts to initiate connections to IPv4 content.
  • Mechanisms do exist to allow the reverse.
• Stateful and stateless versions.
  • stateful can use any prefix
  • stateless has restriction on prefix

NAT64 and DNS64 co-existance.

1. IPv6 host sends AAAA DNS Query
2. DNS64 server tries AAAA lookup and fails
3. DNS64 server successfully resolves IPv4 address
4. DNS64 server generates AAAA DNS response of <IPv6 prefix:IPv4 adress> and sends it back to the client.

(more…)

• point-to-point tunnels
• MCT ( manually configured tunnel )
• GRE ( Generic Routing Encapsulation )

• Virtual point-to-point between two IPv4 routers
• IPv6 iGP routing protocols can run over these virtual links.

(more…)

Similarities to IPv4

• Redistribution takes routes from the IP routing table, not from the iGP databases.
• Route maps can be used for filtering, metrics, route tags.
• Admnistrative distance has not changed.
• Options to prevent routing loops; Administrative distance, route tags, filtering.
• Syntax is the same.

Differences to IPv4

• Supported “match” commands in route-maps vary on iGP
  • OSPF/RIP cannot match op “route-type” with a Route-map
    • EIGRP has no problems using “route-type”
  • Route-map matching IPv6 ACLs must have IPv6 prefix as source portion and “any” as destination of ACL.
• IPv6 redistribute connected does not include interfaces running the iGP;
  • redistribute include-connected

RIPng

• UPD port number 521
• No autosummarization for IPv6
• Destination address FF02::9
• Link-Local next-hops
• IPv6 uses IPv6 AH/ESP Authentication
• Enable it on the interface
  • ipv6 rip CCNP enable fa0/0
• No network command

EIGRP IPv6

• EIGRP uses the neighbor’s link local address as the next-hop
• Destination FF02::AA
• Authentication relies on the IPv6 built-in authentication nad privacy
• IPv4 defaults to auto summarization, IPv6 doesn’t
  • ipv6 unicast-routing
  • ipv6 route eigrp 100
  • (config-if)#ipv6 eigrp 100
  • eigrp router-id RID

(more…)

BGP Path Attributes

“We Love Oranges AS Oranges Mean Pure Refreshment”

R1#sh ip bgp 40.40.40.0
*Mar  1 00:17:21.323: %SYS-5-CONFIG_I: Configured from console by console
R1#sh ip bgp 40.40.40.0
BGP routing table entry for 40.40.40.0/24, version 4
Paths: (2 available, best #1, table Default-IP-Routing-Table)
  Advertised to update-groups:
     1
  30
    3.3.3.2 from 3.3.3.2 (3.3.3.2)
      Origin IGP, metric 0, localpref 100, valid, external, best
  20
    2.2.2.2 from 2.2.2.2 (20.20.20.1)
      Origin IGP, metric 0, localpref 100, valid, external

R1#sh ip bgp
BGP table version is 4, local router ID is 3.3.3.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
*> 20.20.20.0/24    2.2.2.2                  0             0 20 i
*> 30.30.30.0/24    3.3.3.2                  0             0 30 i
*> 40.40.40.0/24    3.3.3.2                  0             0 30 i
*                   2.2.2.2                  0             0 20 i

(more…)